Exo Terra Repti Flo 200 Pump

Intended for fresh water only.
The pump is intended for use in aquariums or terrariums, for example for terrarium waterfalls, water circulation and the like. The pump is suitable for use in water up to +35°C.
Place the pump on the bottom of the terrarium, in clean water. Sand or sediment will cause premature clogging of the internal parts of the pump, or may stop the pump working completely. Therefore ensure that the water does not contain large pieces of dirt, because only in this way will you prevent damage to the impeller housing or the impeller itself. If there is fine sand in the aquarium, Repti Flo foam (available separately) must be used as prevention against clogging. Plug the pump into the mains. On first use the pump must be filled with clean water. If the pump does not start working immediately, shake the pump gently to release any air bubbles. Ensure that the pump is fully submerged in water during operation - the pump must never run dry!