REPTI PLANET Maxi Mister 2.2 l 1 pc

Adjustable amount of mist produced (up to 250 ml per hour).
Flexible adjustable hose from 45 cm to 150 cm long.
If the water tank is empty, the device's protection switches off its operation.
Compatible with a wide variety of enclosures, including vivariums, tanks, cages, terrariums, aquariums, plastic / PVC / acrylic / glass tanks.
Ideal for a large number of reptiles and amphibians, including: agamas, geckos, snakes, turtles, iguanas, lizards, chameleons, frogs, crabs ...
Description of the fogger / humidifier
1. Remove all packaging material. Place the humidifier base (A) in an easily accessible spot next to the terrarium or within its reach.
2. Before use, unscrew the valve on the black bottom of the humidifier tank (B) and rinse the tank with water and a small amount of soap. Rinse thoroughly with clean water until the tank is completely free of the soap solution.
3. Fill the humidifier tank (B) with up to 2 litres of water. Screw the valve back on until it is perfectly sealed.
4. Fit the humidifier tank (B) onto the base (A). Check that the humidifier tank is correctly fitted on the base.
5. Fit the wider end of the flexible hose (C) onto the black neck of the humidifier tank.
6. Extend the hose (C) and place its end into the terrarium / on the top or side of the terrarium. Fit the suction cups onto the hose and stick them to the terrarium wall.
7. Connect the unit to the electricity supply. Switch the switch on the back of the base (A) to the On position. Set the rotary dial on the front of the unit to the desired output. After adjusting the intensity, it may take a few seconds for the output to increase / decrease.
List of parts
1. Main unit
2. Flexible hose
3. Connecting part
4. Tank cover
5. Suction cups
6. Water tank
Basic parameters
Maximum power: 32 W
Voltage: 220 V
Frequency: 50 Hz
Maximum capacity: 2.2 l
Maximum output 250 ml / h